Guide on How to Charge a Vuse Without a Charger

A battery powered device that contains flavors and nicotine and more than 30 other chemicals. It is a portable pen-like device that contains nicotine . When you start to inhale it , it gives you liquid flavors added with nicotine. It has true handling comfort , providing the relaxation you need.

Ways of Charging a Vuse Without a Charger?

  • Using a phone charger can help charge vuse. No special wire is needed to charge a vuse. The post should be micro USB. An iphone or android wire can help you charge your vuse. After plugging it on, you will see a light which shows your vuse is charging.
  • Using a laptop which has a USB port. It helps you, while you are traveling where you can not connect a device, so you can simply put a wire in the laptop USB port and other wire to your vuse. 
  • Using a power bank can help you charge your vuse. A power bank supports a USB port that can help you charge your voice even while walking or driving. It is easy to carry and can be easily kept in the pocket.
  • A DIY charger for your vuse. Making a DIY charger should be the last resort if the Micro USB charger at your disposal, including an android or iPhone charger, doesn’t cut it. A DIY charger will step in if your Vuse doesn’t have a micro-USB charging port. So for that you need to go through an Improvisation process.

Improvisation Process

  • Choosing a USB cable : 

USB cable is required to start with the process.

  • Cut Your Charger:

Cut the outer sheath of your USB cable with the help of a sharp object. After cutting, you will see the inner wires of the cable. Pull out the thin black and red wire . Strip the insulating covers from the thin wire

  • Make your connection

Put the naked edge of the red wire in the middle hole and the naked black wire in the hole left to the middle orifice.The red wire will be connected to the positive terminal, while the black wire will be connected to the negative terminal of your micro USB port.When the two wires are correctly connected, the charging green light on your Vuse should light up. After a successful connection, we recommend using tape to hold everything in place. 

Tips for an Improvised Connection

 There are a few things to consider while charging your vape battery with a DIY connection

  • In case your modified vape charger has other green and white wires. You will only need to plug or connect the peeled red and black wires.
  • If you are off-grid, you can use a solar wireless charger improvisation.
  • NEVER touch any naked wires when you switch on your electricity source. This method is highly risky to batteries and vape users. As such, you can use some insulation like gloves on your hands as you work on this improvisation. 
  • If your vape or Vuse starts to heat up, stop charging the process at once. Overheating will happen due to a faulty electronic connection as you try to charge your vape (Vuse) without the appropriate charging cable. Also, heating up often occurs when too much charge flows into batteries. In some cases, you will feel the excess heat in your wires as you start, warranting an immediate disconnection.
  • At times, even with the right connection in your Vuse’s USB port, you might end up with battery accidents. Therefore, save yourself the harm and spoilt vape by using the appropriate charging cables. If you can, totally avoid peeling any cables.

Vape devices and components 

  • Electronic cigarettes, e-cigarettes, e-cigs, or eGo
  • E-hookahs or hookah pens
  • JUULs, after the top-selling closed pod-based device that looks like a USB flash drive instead of a traditional cigarette or writing pen
  • Mods, which are larger open-system devices that are refillable and produce more vapor
  • Personal vaporizers or PVs
  • Vapes, vape pens, or vape sticks

Some vape devices are known as ENDS or electronic nicotine delivery systems.

Image Source

The liquid that produces vapor comes in a pod or cartridge and may be called:

  • E-juice or e-liquid
  • Juice or smoke juice

Some of the vaping myths are:

  1. Vaping is safer than smoking.
  2. Vaping produces harmless water vapors
  3. Vaping doesn’t create second hand smoke.
  4. It is easy to quit vaping. 

How long does a Vuse Vape take to charge?

It can take between 60 and 80 minutes to charge your vape fully. Some devices allow fast charging, reducing this time to 30-55 minutes. When the green LED flashes ten times, it’s time to recharge your device.

Some of the vuse flavors are:

  • Mint Ice
  • Very Berry
  • Strawberry Jam
  • Infused vanilla
  • Passion fruit
  • Cola Ice
  • Blueberry blast
  • Kiwi Mint

FAQs

1. Can I charge my vape with a phone charger?
Use your vape’s original cord to charge it. Most phone chargers are good, however, those with non-removable cables are built for the device they came with.

2. Can you charge a VUSE with a magnet?
No, you cannot charge a VUSE with a magnet. VUSE e-cigarettes use a USB charger to charge the battery.

3. What voltage should I charge my vape at?
Vape batteries typically have a voltage of 4.2, a nominal voltage of 3.7, and a voltage discharge cut-off between 2 and 3 volts. 

4. Is it Safe to Use a Phone Charger to Charge Your Vuse?
Avoid chargers with USB cables built in. It’s safer to connect your USB cord to a phone charger. Use your vape’s original cord to charge it.

About Shashank

Leave a Reply

Your email address will not be published. Required fields are marked *